Industrial CT Systems – X-Ray Inspection & Metrology

Industrial computed tomography can reveal internal features without cutting a component. Explore the industrial CT systems listed on Metrology Advisor and discuss suitability for your material, part geometry and inspection task.

Browse all product listings · Find suppliers

Start with what you need to see or measure

Defect detection, assembly inspection and dimensional metrology can place different demands on a CT system. The useful result depends on the complete setup: part size, material, wall thickness, X-ray source, detector, scan strategy and analysis software. Do not equate nominal voxel size with measurement accuracy. Ask the supplier to demonstrate the inspection and, where dimensions are required, explain the validation and uncertainty for the application.

Questions to prepare before contacting a supplier

• Material, maximum part dimensions, weight and penetration path.
• Internal geometries, defects or assembly features to inspect.
• Required dimensional tolerances or minimum defect detectability.
• Scan, reconstruction and analysis time for the complete workflow.
• Installation, radiation protection requirements, training and service.

Explore related listings

For a meaningful comparison, send the same drawing and representative parts to each supplier. Request the full workflow time and examples of the resulting report. Confirm whether the proposed configuration is intended for laboratory use, near-production inspection or an automated process.

These are selected listings, not an exhaustive market comparison or a ranking. Specifications, availability, service territories and commercial terms must be confirmed with the supplier.